: Supports multiple output modes, including relay contacts (resistive load 3A/250V AC), voltage pulse for Solid State Relays (SSR), and current outputs (4–20 mA).
: Use the Up and Down keys to increase or decrease the target value in the SV window. xta-7000 temperature controller manual
| Parameter | Name | Function | Typical Value | | :--- | :--- | :--- | :--- | | | Proportional Band | Control sensitivity. Lower = faster response, higher = stable but slow. | 30.0 (start here) | | I | Integral Time | Eliminates steady-state error. Lower = faster elimination (risk of oscillation). | 240 seconds | | D | Derivative Time | Anticipates future error. Prevents overshoot. | 60 seconds | | Ar | Anti-Reset Windup | Limits integral action when output saturates. | 1.0 | | Sc | Sensor Correction | Offsets a faulty sensor reading. | 0.0 | | At | Auto-tune Enable | 0 =Off, 1 =On (self-tune), 2 =On with light overshoot. | 1 | | AL1 | Alarm 1 Mode | 0 =No alarm, 1 =Absolute high, 2 =Absolute low, 3 =Deviation high/low. | 1 | | HY | Hysteresis (for On/Off mode) | Deadband to prevent relay chattering. | 2.0 | : Supports multiple output modes, including relay contacts