Ws-1958bt Music Car Speaker Manual [exclusive] Jun 2026

A: With power on, use a paperclip to press and hold the RESET pinhole (located near the SD card slot) for 10 seconds. All pairings and presets will clear.

A: Yes, but you need a 12V DC power supply with at least 2A output and a 5.5mm x 2.1mm barrel plug (center positive). A standard AC-to-12V adapter works, but do not exceed 15V. ws-1958bt music car speaker manual

Plug in the USB charging cable to act as an external antenna for better FM reception [2]. A: With power on, use a paperclip to

| Button/Function | What it does | |----------------|---------------| | (short press) | Switch between BT / AUX / USB / FM radio (if equipped) | | Power (long press 3s) | Turn on/off | | Play/Pause | Play/pause in BT/USB mode | | Next/Prev (▲/▼) | Next/previous track or FM station preset | | Vol + / Vol - | Adjust volume | | Light button (LED icon or "L") | Change RGB light mode or turn lights off | | Pairing | Hold Play/Pause in BT mode to disconnect/re-pair | | Wired remote (if included) | Small square controller – usually Mode, Vol+/-, Track, Light | A standard AC-to-12V adapter works, but do not exceed 15V

Note: This information is based on supplier datasheets for the EONKO/WSTER WS-1958BT Car Shape Speaker. WS-1958BT - Car MODEL SPEAKER