Total Station - Leica Tcr 1203 Manual

: Automatically fine-points the telescope to the center of a prism, significantly speeding up measurement cycles. PowerSearch (PS)

| Error Code | Message | Probable Cause | Manual Solution | | :--- | :--- | :--- | :--- | | 104 | "Tilt out of range" | Tripod legs sunk or footscrews loose | Re-level. Check ground stability. | | 252 | "EDM signal too weak" | Target reflectivity low (RL mode) | Switch to prism mode or add reflective tape. | | 311 | "Battery empty" | Voltage < 7.2V | Replace with charged GEB211. | | 450 | "CF card error" | Card not formatted or corrupted | Format card in the instrument. | Total Station Leica Tcr 1203 Manual

: The manual recommends periodic "Check & Adjust" procedures to calibrate the horizontal collimation and tilting axis inclination. : Automatically fine-points the telescope to the center

Perform a measurement to a known point to orient the horizontal circle. Measuring Points : Use the Survey program. | | 252 | "EDM signal too weak"

The Leica TCR 1203 is a high-precision total station from the TPS1200 series

The "03" in 1203 denotes its , making it a mid-to-high precision instrument suitable for most boundary work, construction staking, and topographic surveys.