Simco Fmx002 Manual Top [work] 📥

: Use the converging LED lights to maintain the exact 25mm distance; improper distance will result in incorrect voltage readings.

: The conductive resin (ABS) case must be grounded using a supplied grounding lead to drain any existing charges and provide a proper reference point for measurement. Zeroing the Meter simco fmx002 manual top

: Depress the release buttons on the side to attach the metal ion balance plate assembly to the end with the SIMCO logo. : Press the button to switch to ion balance mode (measures up to : Use the converging LED lights to maintain

The FMX-002 uses a bar graph (red for positive, blue for negative) and a three-digit digital display for precise numerical data. : Press the button to switch to ion

At the very of the FMX-002 is a plastic housing containing a vibrating chopper-type sensor (also known as a field mill). This is not a simple metal plate. It requires care:

: The manual warns that HOLD does not freeze the internal zeroing circuit. If you press HOLD and then move the meter to a highly charged area, the stored value remains, but the internal sensor may drift. Always release HOLD before re-zeroing.

The SIMCO FMX002 system operates as follows: