| Problem | Likely cause | Solution | |---------|--------------|----------| | Weight stack won’t lift | Cable routed incorrectly or tangled | Re-route according to diagram | | Press arm hits frame | Incorrect pivot bolt installation | Check assembly order of washers/spacers | | Cables jump off pulleys | Missing pulley guards or bent bracket | Replace bracket or add nylon washers | | Seats wobble | Loose bolts or missing rubber feet | Tighten or add anti-slip pads | | Selector pin hard to insert | Bent selector rod or misaligned weight plates | Realign guide rods |
Household glass cleaner (like Windex) for easier foam roller installation. 2. Main Frame Assembly pacific fitness del mar home gym assembly manual
: Since Pacific Fitness was acquired by Precor, many systems share structural designs. Solana Assembly Manual | Problem | Likely cause | Solution |
Insert the guide rods into the holes on the main base. Use a spacer and weight cushion at the bottom of each rod. Solana Assembly Manual Insert the guide rods into
Proper cable routing is essential for smooth operation. Reference the Del Mar Service Manual for detailed diagrams. Main Cable:
The Del Mar is heavy. The assembly manual typically emphasizes the "base-up" approach. The upright posts must be perfectly seated into the base frame.
Install leg developer and rollers