Naniwa Dup 09 Ccd E- - 18 ((exclusive)) Jun 2026

The provided topic, appears to refer to a specific technical component—likely an industrial LED module or a specialized imaging sensor—produced by the Japanese company Naniwa (Ibex Naniwa).

While the exact full string does not appear in a single public catalog, it can be broken down based on Naniwa's standard naming conventions: Likely Component Identification : The manufacturer, Naniwa Pump Manufacturing Co., Ltd. NANIWA DUP 09 CCD E- - 18

| Issue | Symptom | Probable Cause | Solution | | :--- | :--- | :--- | :--- | | | Machine pauses reporting "surface defect" when none exists | Slurry bubbles or dried slurry flakes on the platen | Increase slurry flow volume or adjust CCD threshold sensitivity via the "E" HMI. | | Carrier "E- - 18" Jamming | One of the 18 work carriers stops rotating; error code 18-07 | Worn carrier gear teeth or incorrect back pressure | Replace the polymer carrier ring. Check that pneumatic pressure does not exceed 12 psi. | | Thickness Variation | Parts from center carriers are thicker than edge carriers | Platen conditoning disc worn unevenly | Use the NANIWA auto-conditioning routine (30 min diamond disc run). | The provided topic, appears to refer to a