Connect the device in BROM mode, use SP Flash Tool’s “Read Back” to dump the entire flash, then use a tool like Wwr_MTK to generate a new scatter file.
partition_index: 0 partition_name: preloader linear_start_addr: 0x0 physical_start_addr: 0x0 partition_size: 0x400000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_download: true is_encrypted: false reserve: 0x0 mt6768 scatter file new
partition_index: 6 partition_name: RECOVERY file_name: recovery.img is_download: true type: EMMC linear_start_addr: 0x01400000 physical_start_addr: 0x01400000 partition_size: 0x01000000 region: EMMC_USER Connect the device in BROM mode, use SP
[Revised] How to use SP Flash tool to flash Mediatek firmware | | S_FT_DOWNLOAD_FAIL (0xFC0) | Partition size conflict (e
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Preloader address mismatch or corruption. | Find the exact preloader for your build version. | | S_FT_DOWNLOAD_FAIL (0xFC0) | Partition size conflict (e.g., super partition too small). | Use the scatter file that came with the exact super.img you are flashing. | | STATUS_EXT_RAM_EXCEPTION | DRAM setup failed; old scatter has wrong region config. | Update SP Flash Tool to v5.2124+ and ensure DRAM config in scatter is correct. | | Image type is not supported | You are trying to flash a raw system.img to a super partition. | You need a new scatter that supports super logical partitions. |
MT6768 scatter file (often associated with the MediaTek Helio G80 chipset) is a critical text document used by the SP Flash Tool to communicate with your device's hardware