Mikrotik L2tp Server Setup Full ~upd~

If your router is behind another NAT device (e.g., an ISP modem in router mode), you must forward UDP ports 500, 1701, and 4500 to your MikroTik’s LAN IP. For best results, put your ISP modem in bridge mode.

/ip ipsec proposal add name=vpn-proposal auth-algorithms=sha256 enc-algorithms=aes-256-cbc lifetime=8h pfs-group=modp2048 mikrotik l2tp server setup full

(only LAN traffic goes through VPN, internet goes direct from client), do not send a default gateway via the L2TP profile. Instead, push local routes. If your router is behind another NAT device (e

/ip pool add name=VPN-Pool ranges=192.168.88.100-192.168.88.150 Use code with caution. Copied to clipboard an ISP modem in router mode)