: The project or board name for the device's hardware platform.
| Failure Mode | Symptom | Root Cause | Solution | | :--- | :--- | :--- | :--- | | | Visible drip at thread interface | Worn O-ring or bonded seal | Replace seal; re-torque to spec | | Thread galling | Seizure during assembly/disassembly | Insufficient lubrication or mixed steel grades | Use anti-seize compound (e.g., copper paste) | | Cracked fitting body | Sudden oil spray | Over-torque or pressure spike beyond rating | Replace fitting; install arrestor valves | | Corrosion pitting | Rust weeping through plating | Exposure to salt spray or acidic fluids | Upgrade to stainless steel 316 version | | O-ring extrusion | Ring-shaped material near threads | High pressure + incorrect gap clearance | Use backup rings or higher durometer seals | k61v1-64-bsp
k61v1-64-bsp
To understand the utility of this BSP, one must first deconstruct its name. In the conventions of Android and MediaTek development: : The project or board name for the
FILESEXTRAPATHS:prepend := "$THISDIR/files:" SRC_URI += "file://add-gt911-touchscreen.cfg \ file://k61v1-64-touchscreen.dts" do_configure:append() merge_config.sh -O $B $B/.config $WORKDIR/add-gt911-touchscreen.cfg k61v1-64-bsp