Use a file extraction tool (like Windows File Explorer, WinZip, or 7-Zip) to unzip the contents of the ZIP file to a folder on your computer.

When a Huawei modem is functioning normally, Windows recognizes it as a NDIS (Network Device Interface Specification) or a standard modem on a high-numbered COM port. But when the modem’s firmware is corrupted, or a flash process fails, the device enters a failsafe mode. In this state, the modem identifies itself to Windows as "Huawei USB COM 1.0" – a bare-bones serial interface. Without this specific driver, the PC cannot see the device, rendering firmware recovery tools useless.

: Recovering devices that won't boot into the OS or Fastboot.

To perform deep-level repairs on devices powered by Kirin chipsets, your computer must recognize the phone in a specific low-level boot mode. This is where the becomes the most essential tool in your repair kit. What is the Huawei USB COM 1.0 Driver?

: Assisting in the removal of Factory Reset Protection (FRP) when standard methods are unavailable.

If your Huawei smartphone is stuck in a boot loop or fails to power on normally, it might appear in your computer's Device Manager as "USB SER" or "Huawei USB COM 1.0". To fix this, you need the , a critical component for unbricking devices, bypassing FRP (Factory Reset Protection), and flashing board software. What is the Huawei USB COM 1.0 Driver?

This mode is not the standard MTP or ADB connection used for file transfer or debugging. Instead, it is a low-level, pre-boot state typically used when: