Hp Mu06 Notebook Battery Pinout Configuration [work]

Note: Some 9-pin revisions swap Pin 6 and 7 functions. Always verify continuity between negative pins and the cell negative terminal to identify ground.

Negative battery terminal; usually connected to the chassis ground. SMBC (Clock) Hp Mu06 Notebook Battery Pinout Configuration

: The battery’s protection FETs are normally open when the battery is disconnected. Only after receiving the correct SMBus command from the laptop’s EC do the FETs close, delivering power to Pins 6 & 7. This is why a fully charged MU06 battery shows 0V on Pins 6 & 7 when unplugged from the laptop. Note: Some 9-pin revisions swap Pin 6 and 7 functions

| Battery Model | Pin Count | Voltage | Compatibility warning | |---------------|-----------|---------|------------------------| | MU06 | 7-pin | 11.55V | Pavilion x360 14, 15s | | MU09 | 7-pin | 11.55V | Larger capacity, same pinout | | HT03 | 6-pin | 11.4V | Different latch position – will not fit | | KC06 | 5-pin | 7.6V | 2S configuration – do not interchange | SMBC (Clock) : The battery’s protection FETs are

. These are the larger outer blades used for the main return path. Pin 3: SMbus Clock (C / SCL)

typically features a configuration . While HP does not always provide an official public pinout diagram, community data and technical teardowns indicate the standard layout used for these SMBus-based batteries. Standard HP MU06 Pinout (9-Pin Layout)